Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

Step 16

Step 17

Step 18

Step 19

Step 20

Locate a copier with low counter reading & good service record

Remove all accessories, covers, panels, DV unit, laser, imaging unit, strip copier down to frame, vacuum 7 blow out unit. Replace all paper feed, auxillary & registration rollers.

Clean & test laser unit. Reinstall & align in copier.

Clean & test scanner unit. Reinstall & align on copier.

Parts to be replaced during remanufacturing process.

Rebuild transport unit.

Install transport unit.

Rebuild development unit.

Install development unit.

Rebuild fuser unit.

Install fuser unit.

Rebuild imaging unit.

Install imaging unit.

Reinstall all covers.

Remove all covers off RADF unit vacuum and blow out. Clean all feed rollers.

Replace feed in belt. Pick-up separation rollers & install in RADF unit.

Reinstall covers on RADF.

Remove all covers off finisher vacuum & blow out. Clean all feed rollers.

Reinstall all covers on finisher.

Assemble all components of copier system, calibrate & test thoroughly.